The A319 and A320 air data system turns pitot and static pressure into airspeed, altitude, and vertical speed. It doesn’t measure aircraft attitude; that job belongs to inertial reference sensors. Knowing how these systems differ makes the aircraft’s instrument picture easier to understand.

Multiple Choice

Which is NOT supplied by the Air Data System?

The Air Data System derives airspeed, altitude, and vertical speed from the pitot-static system and air data computers. It uses dynamic and static pressures to calculate how fast you’re moving through the air, the altitude above mean sea level, and the rate of altitude change. Attitude information, which describes the aircraft’s orientation relative to the horizon, comes from inertial sensors in the AHRS/IRS, not from the air data system. So the item not supplied by the Air Data System is attitude information.

Air Data and Attitude on the Airbus A319 and A320

An Airbus A319 or A320 needs a steady stream of information to fly safely. The flight crew and aircraft systems need to know how fast the aircraft is moving through the air, how high it is, whether it is climbing, and how it is tilted relative to the horizon. Those details may appear together on cockpit displays, but they don’t all come from the same source.

That distinction matters. Air data describes the aircraft’s movement through the surrounding air and its pressure-based altitude. Attitude describes the aircraft’s orientation in space. The two sets of information work side by side, yet they come from different sensing functions.

First, what does the Air Data System measure?

The Air Data System uses pressure measurements to derive several important flight parameters. On the A319 and A320, pitot probes sense pressure associated with the aircraft’s movement through the air, while static ports measure the surrounding air pressure. Air Data Reference functions then use these inputs to calculate values such as airspeed, altitude, and vertical speed.

A useful way to picture it is to think of a weather station mounted on the aircraft. It measures pressure and temperature, then turns those measurements into information pilots can use. The system doesn’t simply read a speed number from a sensor; it interprets pressure changes and applies calculations.

The flight deck brings these values together with other information, so a display can show airspeed beside attitude and altitude. That convenient layout can make the data seem as if it all comes from one source. In fact, the display is more like a dashboard in a car: the speedometer and fuel gauge sit next to each other, but they measure different things.

How pressure becomes airspeed

A pitot probe faces into the airflow and senses total pressure. Static ports measure static pressure, which is the pressure of the surrounding air. The difference between total and static pressure is called dynamic pressure. In simple terms, it reflects the pressure created by the aircraft moving through the air.

Air Data Reference functions use that pressure difference to derive indicated airspeed. The value shown to the pilots is not a direct measurement of ground speed. Wind can make the aircraft move over the ground faster or slower than it moves through the air, much like a boat can travel at one speed through water while the current changes its speed relative to the shore.

Air data calculations also account for other factors. Depending on the parameter, temperature and pressure conditions matter too. For instance, true airspeed reflects the aircraft’s speed through the surrounding air more directly than indicated airspeed does. Mach number expresses speed as a proportion of the local speed of sound, which changes with air temperature.

These values help the crew and aircraft systems understand the flight condition. They’re useful for navigation, performance monitoring, and protecting the aircraft within its operating limits. The system’s job is not merely to collect numbers; it turns sensor readings into information that supports decisions.

Altitude and vertical speed: related, but not identical

Static pressure changes with height. As an aircraft climbs, surrounding pressure generally falls; as it descends, pressure rises. The Air Data System uses this relationship to calculate barometric altitude. That altitude is based on atmospheric pressure and a reference setting, so it is important to distinguish it from height above the terrain.

Vertical speed describes how quickly altitude is changing. The system derives it from changes in static pressure over time. If pressure is falling, the aircraft is likely climbing; if pressure is rising, it is likely descending. The resulting vertical-speed indication gives the crew a sense of the climb or descent rate.

Here’s a small but important detail: altitude and vertical speed are linked, but they answer different questions. Altitude asks, “How high?” Vertical speed asks, “How quickly is that height changing?” It’s similar to looking at the floor number in a lift and the rate at which the lift is moving. One tells you where you are; the other tells you what’s happening now.

Because pressure readings can be affected by sensor faults, blockages, or other conditions, air data is monitored and compared across system sources. This cross-checking helps the aircraft detect disagreement and gives the crew clues when readings don’t match what they expect. No sensor system is magical; reliable operation depends on good inputs, sound calculations, and careful monitoring.

Attitude comes from a different kind of sensing

Attitude is the aircraft’s orientation relative to the horizon. It includes pitch—the nose-up or nose-down angle—and roll, the bank angle from side to side. These are not pressure-based measurements. They come from inertial sensing.

On the A319 and A320, the Air Data and Inertial Reference System (ADIRS) brings air data and inertial reference functions together within the aircraft’s broader information architecture. An Air Data Inertial Reference Unit (ADIRU) includes distinct functions: the Air Data Reference (ADR) part supplies air data, while the Inertial Reference (IR) part supplies inertial information such as attitude and heading.

So, the equipment may be packaged together, and its information may appear together on cockpit displays, but the sources remain distinct. The ADR side processes pitot-static and related data. The IR side uses inertial sensors to track the aircraft’s motion and orientation. This is why attitude information is not supplied by the Air Data System itself.

Inertial sensors work by detecting motion and rotation. Their measurements allow the system to establish how the aircraft is oriented and how it moves through space. That’s a different job from measuring air pressure. A handy comparison: air data is like a barometer combined with a speed-sensing method; inertial reference is more like a highly refined electronic sense of balance and rotation.

Why the distinction matters in the cockpit

Keeping the sources straight helps make sense of cockpit indications and system behavior. If airspeed or barometric altitude appears unreliable, attention turns toward air data inputs and the related calculations. If attitude information is suspect, the crew considers the inertial reference source and associated indications. The symptoms may appear on neighboring displays, but the underlying causes can be quite different.

The distinction also explains why one type of information can be available when another is not. A problem affecting pitot or static sensing may disrupt airspeed, altitude, or vertical speed without directly removing attitude data. Conversely, an inertial reference problem may affect attitude information while pressure-based air data continues to be available. Actual system effects depend on the fault and the aircraft’s configuration, so crews follow the approved procedures and indications for the specific situation.

There’s a broader lesson here for anyone learning aircraft systems: equipment labels can describe a system that contains several functions, rather than one sensor doing everything. On the A319 and A320, ADIRS is a useful example. It connects air data and inertial reference functions within one system family, but it does not make the two sources interchangeable.

One display, several sources

A flight display is designed to make information easy to scan. That means data from separate systems can appear close together, forming a clear picture of the aircraft’s condition. The arrangement is practical, but it can blur the line between where each value originates.

Remember the basic split:

  • Airspeed, barometric altitude, and vertical speed come from Air Data Reference functions using pressure measurements and related calculations.

  • Attitude comes from inertial reference functions that sense aircraft orientation and motion.

That separation is more than a technicality. It helps explain how the aircraft builds a reliable picture of flight: pressure-based systems describe how the aircraft moves through the air and changes altitude, while inertial systems describe how it is positioned and oriented. Together, they give the crew a coherent view—each source doing the job it was designed to do.